====== Shared equipments ======


===== 3D printers =====

We have several 3D printers

==== Fused Filament printing ====

There are two printers in 415:

  * **Prusa MK3S + MMU2** For printing monochrome parts in PETG, or polychrome parts in PLA. The typical resolution is 200µm, the maximal volume is 25 x 21 x 21 cm.
  * **Anet A8** For printing monochrome parts in PLA, with a lower resolution. Maximal volume: 25 x 22 x 22 cm

Discuss with Raphaël Candelier for details.

====  Photopolymérisation printing====

We have a Formlabs2 printer in the LJP/LKB worksop. This printer makes high resolution parts in semi-transparent resin.

It is available only //via// workshop members, so you need to go through Carou like with any other mechanical parts.

===== Small workshop =====
 
In room 410:

  * Laser cutter //Full spectrum Laser// (Raphaël Candelier)
  * Micromilling //Minitech mach// (Alexis Prévost)
  * Mini CNC //Bantam tools //(Raphaël Candelier)
  * Drill
  * Mini drill
  * Welding table and electronic parts (Raphaël Candelier)

===== Chemistry and glass =====

Salle 503

  * MilliQ water. Responsable: André Estevez

  * Autoclave. Responsable: Maxime Deforet
Training is required to use it. If necessary, ask trained people: Wafa Ben Youssef, Maxime Déforet, Nicolas Escoubet, Maria Giralt Zuniga, Nelly Henry, Clément Nizak, Lydia Robert, Nicolas Fix-Boulier

  * Washing machine.

  * Ice machine. Jean-Christophe Galas

  * pH-meter. André Estévez
 


===== Microbioal Safety Cabinets (MSC) ===== 

(Nicolas Fix-Boulier 07/2022) 

The laboratory is equipped with MSC.
Clean the benchtop with ethanol before and after each use. Please do not overstock inside so as not to obstruct the airflow and ensure good filtration.

A tutorial video : https://www.youtube.com/watch?v=xADw5-VEe04


===== -80ºC Freezer =====
Responsable: Maxime Deforet\\
(Online control of temperature is possible via https://apps.thermofisher.com/apps - Ask Maxime for credentials).\\
When you put a new box in the freezer, please write down your name on the freezer map that is hung on the door.

Cryoboxes are availables in plastics storage rooms (504) or in the small white cabinet in lab 509 (see with Nicolas Fix-Boulier).

(Nicolas Fix-Boulier, 07/2022)

To facilitate its use, a sheet with the **the -80°C freezer map** (room 512) is displayed on its door, and **available here** : 
https://docs.google.com/spreadsheets/d/1WGb9CcmWcThByh898cLyvHu-it-QpbtobJZLc4Cj36o/edit#gid=0

(for access rights, ask Nicolas)

Do not hesitate to reserve one or more location(s) by writing your name on the sheet and/or on the link.

Tab 1: plan of the freezer -80°C, must be updated with each modification

Tab 2 (optional): Details of boxes stored in locations. Especially useful when you have several locations.